Start creating

Leap API

Veo 3.1 Fast APIGoogle's model, through Leap

Google's fast video model, with dialogue, effects and music in sync. One Leap key and one balance run it and every other model, priced per call in dollars.

Get an API keyRead the quickstart

First $5 top-up, no card fee.

  • One key for every model
  • Every call quoted first
  • A failed call costs nothing
curl https://api.tryleap.ai/v1/generations \  -H "x-api-key: $LEAP_API_KEY" \  -H "content-type: application/json" \  -H "prefer: wait=60" \  -d '{    "model": "google/veo-3.1-fast",    "input": {      "prompt": "A heron lands on a still lake at dawn",      "aspect_ratio": "16:9",      "duration": 8,      "audio": true    }  }' # Video often outlasts the wait and answers "queued" or "running".# Put its "id" in GENERATION_ID and read it again until it is done:# curl https://api.tryleap.ai/v1/generations/$GENERATION_ID -H "x-api-key: $LEAP_API_KEY"

Set LEAP_API_KEY and send it. With prefer: wait=60 the answer holds the result when the call finishes within a minute; a longer one is read again by its ID.

Model ID
google/veo-3.1-fast
Price per call
$0.54 to $1.60
This call
An 8-second clip with sound costs $1.60.
First top-up
A first top-up of $5, with no fee, covers three calls like it.

What it makes

Made with Veo 3.1 Fast

Real Veo 3.1 Fast runs on Leap. Each one passed Leap's media quality check before it was shown.

More on the Veo 3.1 Fast page
  • Salt flat rider, generated on Leap

    “Cinematic wide shot. The camera tracks low and parallel to the ground alongside the lone rider as the horse gallops steadily across the immense white salt flat, a long plume of golden dust trailing behind and drifting in the wind, the long shadow racing across the cracked salt, distant blue mountains holding still on the horizon. Warm late sun, smooth stabilized tracking, 65mm film look, natural horse gait.”

  • Powder turn, generated on Leap

    “Action sports, slow motion: the snowboarder carves a deep turn through fresh powder, a huge backlit spray of snow arcs off the board and drifts down glittering in the sun, the rider stays whole and in frame, smooth telephoto tracking shot. Realistic motion.”

  • Hot sauce, hyped in the kitchen, a real run on Leap

    Hot sauce, hyped in the kitchen

  • Headphones, deadpan at the desk, a real run on Leap

    Headphones, deadpan at the desk

  • Cold brew, deadpan in a parked car, a real run on Leap

    Cold brew, deadpan in a parked car

  • Fig and cedar candle, in the bedroom, a real run on Leap

    Fig and cedar candle, in the bedroom

The answer

What comes back

A generation. Check status first: succeeded has the file in output, a signed link that works for 24 hours, so download what you keep. failed has error and failure_cause, and costs nothing. usage.cost_usd is what the call was charged.

200 OK, trimmed
{  "id": "gen_...",  "object": "generation",  "model": "google/veo-3.1-fast",  "status": "succeeded",  "output": [    {      "type": "video",      "url": "https://api.tryleap.ai/files/..."    }  ],  "error": null,  "usage": {    "cost_usd": "1.6"  }}

Your own photo

Start from an image

Upload the image to POST /v1/files and pass the ID it returns in first_frame. Inputs take file IDs, not URLs. Files and uploads covers video and sound.

curl, with jq
# Upload the photo (PNG, JPEG or WebP, up to 4 MB) and keep its ID.FILE_ID=$(curl -s "https://api.tryleap.ai/v1/files?filename=photo.jpg" \  -H "x-api-key: $LEAP_API_KEY" \  -H "content-type: image/jpeg" \  --data-binary @photo.jpg | jq -r .id) # Then run the model with it.jq -n --arg file "$FILE_ID" '{  "model": "google/veo-3.1-fast",  "input": {    "prompt": "A heron lands on a still lake at dawn",    "aspect_ratio": "16:9",    "duration": 8,    "audio": true,    "first_frame": $file  }}' \  | curl https://api.tryleap.ai/v1/generations \    -H "x-api-key: $LEAP_API_KEY" \    -H "content-type: application/json" \    -H "prefer: wait=60" \    -d @- # Still "queued" or "running" after the wait? Read it again by its "id".

Inputs

What Veo 3.1 Fast takes

Only prompt is needed; everything else has a default. The same schema is public, with no key, at api.tryleap.ai/v1/public/models/google/veo-3.1-fast.

Promptprompt
Text, up to 4,000 characters, required
First framefirst_frame
An imageAn image the video starts from. It is cropped to the video's shape.
Aspect ratioaspect_ratio
16:9, 9:16. Default: 16:9
Durationduration
4, 6, 8 s. Default: 8 s
Resolutionresolution
720p, 1080p. Default: 1080p
Soundaudio
On or off. Default: onGenerate dialogue, effects and music with the video.

Pricing

Price per call

An 8-second clip with sound costs $1.60. A first top-up of $5, with no fee, covers three default calls. Prices are the provider's list price plus our margin (35% on most models, less on the dearest video), read from the catalog, and a quote gives the exact price of any input for free.

Veo 3.1 Fast and its family

A free quote
curl https://api.tryleap.ai/v1/quotes \  -H "x-api-key: $LEAP_API_KEY" \  -H "content-type: application/json" \  -d '{    "model": "google/veo-3.1-fast",    "input": {      "prompt": "A heron lands on a still lake at dawn",      "aspect_ratio": "16:9",      "duration": 8,      "audio": true    }  }'

How it works

How the Veo 3.1 Fast API works

Every model takes the same request, a model ID and its input, and results, prices, failures and limits work the same way for all of them.

  • Wait for it, or hear when it ends

    prefer: wait=60 holds the request until the result is ready, for up to a minute. A longer run is read again by its ID, or a signed webhook tells your server when it ends.

    prefer: wait=60 / "webhook": "https://..."

    In the docs

  • Failed calls cost nothing

    The price is held when a call starts and charged only if it succeeds. A failed or refused call comes back with its failure_cause, and the hold is released.

    "status": "failed" / "failure_cause": "provider_refused"

    In the docs

  • The price before the call

    POST /v1/quotes takes the same body as a generation and returns its exact price, with the input checked, for free. Every result carries what it was charged.

    POST https://api.tryleap.ai/v1/quotes / "cost_usd"

    In the docs

  • Rate limits

    600 requests a minute per API key and 300 per IP address. A 429 carries Retry-After with the seconds to wait.

    RateLimit-Remaining / Retry-After

    In the docs

  • Safe retries

    Send an idempotency key and a retry after a dropped connection returns the same generation instead of starting a second one.

    idempotency-key: <uuid>

    In the docs

  • Batches

    POST /v1/batches starts up to 50 calls in one request, priced and held together, so either all start or none do.

    POST https://api.tryleap.ai/v1/batches

    In the docs

MCP

Or let your agent call it.

Leap's MCP server lets Claude Code, Claude, VS Code and other MCP clients run Veo 3.1 Fast, read its inputs and fetch the result, on your balance. Signing in happens in the browser, so there is no key to paste.

Connect an agentThe agent guide
Add Leap to Claude Code
claude mcp add --transport http leap https://app.tryleap.ai/api/mcp

Claude Code signs you in through the browser the first time it calls Leap.

Teach your coding agent the Leap API
curl -fsSL https://www.tryleap.ai/install.sh | sh

Installs the Leap skill for every coding agent it finds: which endpoint to call, how to read a model's inputs, when to wait and when to poll.

Questions

Veo 3.1 Fast API questions

How much does the Veo 3.1 Fast API cost?
An 8-second clip with sound costs $1.60. By length and sound, a call costs $0.54 to $1.60. That is the provider's list price plus our margin, the same as in the studio. POST /v1/quotes prices any input for free before you run it.
Can I try the Veo 3.1 Fast API for free?
No. API keys run on paid credit, so a key's first call needs a top-up, and quotes are free. An 8-second clip with sound costs $1.60. A first top-up of $5, with no fee, covers three default calls.
Do I pay for calls that fail?
No. The price is held when a call starts and charged only if it succeeds. A call that fails, or that the model's safety filter refuses, comes back with status "failed" and a failure_cause, and the hold is released.
Is this Google's own API?
No. Leap is a separate service: it sends your call to Google's model and gives you what it makes, so you need no Google account. One Leap key runs Veo 3.1 Fast and every other model in the catalog, from one balance.
What are the rate limits?
600 requests a minute per API key and 300 a minute per IP address. A batch starts up to 50 calls in one request. A 429 says how long to wait in its Retry-After header.
Can an AI agent call it?
Yes. Leap's MCP server lets Claude Code, Claude, VS Code and other MCP clients find Veo 3.1 Fast, read its inputs, run it and fetch the result on your balance. The client signs you in through the browser, so there is no key to paste.

Build with Veo 3.1 Fast.

Keys run on paid credit, and the first top-up has no fee. The same key runs every model on Leap.

Get an API key